cz shadow 2 optics ready plate

BURRIS FAST FIRE PARAGRAPH!! I like the original CZ optic plates for the S2OR.they have an access hole drilled for changing out extractor/extractor springs and fit like they shouldI had to order from Eric G's website in France to get the correct ones for RTS2 (they were not available anywhere else), only took a week from France to my Canadian PO box. Powered by BigCommerce For Holosun Great post! Doctor CZ P-10 & Shadow 2 Optic Plate Adapter for DeltaPoint Pro & Shield RMS (19231) SHIELD SMS 1 / 3. CZ Shadow 2 Optics Ready V4 RMR / SRO / Holosun by CHPWS The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia. Save 10% On Keystone Rings And Any Scope Mount. CLICK HERE TO VIEW INSTALLATION INSTRUCTION VIDEOS! The CZ Optics Ready Plate Kit allows use with Trijicon RMR, and Holosun 407, 507, and 508. With a wide variety of red dots covered, this mount for the CZ Shadow 2 optic ready pistol allows for red dots such as Vortex Viper, C-More RTS2, and the Trijicon RMR to be mounted with ease. If this was marked complete in error, you can undo . The dovetail has a progressive taper to allow for easier install. Trijicon SRO You can find here all sorts of CZ accessories from CZ itself as well as from other European manufacturers. It's not cheap 1425. Aluminum CZ Shadow 2 Optics Ready V4 RMR / SRO / Holosun by CHPWS The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia. Read more. Shadow 2 Kadet Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). Black CZ P-10 Holosun 509T Red Dot Optic Adapter Plate by CHPWS This CZ Shadow 2 red dot scope mount replaces the stock plate included on the factory optic ready version and allows for a red dot to be installed. Front Sight with fiber optics for CZ 75 Sp-01 SHADOW, Shadow 2 $ 42.00 Select options CZ Shadow 2 Optics Ready (OR) Cover Black CZ Shadow 2 Optics Ready Plate Docter / Vortex Venom Plates for RMR Footprint Optic Cuts. CGW CZ Shadow 2 Optic Ready Plate w/Rear Sight for RMR, SRO, 507C by Cajun Gun Works CGW's own design for a solid steel Shadow 2 Optic Ready Plate with integral . We ship internationally and accept online card payments! For. Fits RMR Pistol Mounts Just as the standard Shadow 2 has become the gun of choice for many USPSA Production Division competitors, the Shadow 2 Optics-Ready is ideal for USPSA Carry Optics. Choose . Buy CZ Shadow 2 Optic Ready 9mm 19rd Blue Grips CZ USA 91251 NO CC FEES : GunBroker is the largest seller of Semi Auto Pistols Pistols Guns & Firearms All: 973590769 . Fits Leupold DeltaPoint Pro, Shield RMS, Shield SMS, J Point Frame Steel. I have read and understand this mount will NOT work with the RMRcc. $ 125.00 Only 1 left in stock Add to cart SKU: 119903 Does it fit my model? SKU 91249. AIMPOINT ACRO PLATE | CZ SHADOW 2 OR. CZ TS 2, CZ Shadow 2, CZ P-10 models, CZ 75 P-01 & Compact, CZ P-07, CZ P-09 , CZ 75B and other CZ 75 models! What's not to like? U moet JavaScript geactiveerd hebben om de volledige functionaliteit van deze website te kunnen benutten. CZ P-10 OR RED DOT PLATE | C-MORE RTS / STS, CZ P-10 OR RED DOT PLATE | HOLOSUN 407C, 507C, 508T, CZ P-10 OR RED DOT PLATE | HOLOSUN 407K & 507K, CZ P-10 OR RED DOT PLATE | LEUPOLD DELTA POINT PRO, CZ P-10 OR RED DOT PLATE | SHIELD RMS / SMS, CZ P-10 OR RED DOT PLATE | TRIJICON RMR / SRO, CZ P-10 OR RED DOT PLATE | VORTEX VENOM / DOCTER, CZ SHADOW 2 OR RED DOT PLATE UNIVERSAL | TYPE A, CZ SHADOW 2 OR RED DOT PLATE UNIVERSAL | TYPE E, CZ SHADOW 2 OR RED DOT PLATE | C-MORE RTS / STS, CZ SHADOW 2 OR RED DOT PLATE | HOLOSUN 407C, 507C, 508T, CZ SHADOW 2 OR RED DOT PLATE | LEUPOLD DELTA POINT PRO, CZ SHADOW 2 OR RED DOT PLATE | SHIELD SMS / RMS, CZ SHADOW 2 OR RED DOT PLATE | TRIJICON RMR / SRO, CZ SHADOW 2 OR RED DOT PLATE | VORTEX VENOM / DOCTER. document.getElementById( "ak_js_1" ).setAttribute( "value", ( new Date() ).getTime() ); This site uses Akismet to reduce spam. What you're using the gun for will dictate how you want to set up your CZ Shadow 2 holster. We ship internationally and accept online card payments! Tactical Hyve. This CZ Shadow 2 Review covers the multiple pros and cons of one of CZ's most popular handguns. But this is still something you'll want to verify. I've been running the CHPWS plate for an SRO on my S2OR for a while now, no complaints. drill hole so you can punch out the extractor pinthe CZ plates have a hole for that purpose, check it out.I ordered 2 CZ factory plates from Eric in France off his site and it was in my mailbox a week later direct from France (I live in Canada), even with the Covid thing going onvery happy as I could not get my hands on a plate for RTS2 CMore. Clear editor. CZ Shadow 2 OR - Optics Ready. one (1) CZ factory red dot plate for Shadow 2 or P10. Save my name, email, and website in this browser for the next time I comment. If you need help with this please contact us. 6-32Threaded Hole for the scope manufactures mounting screws CZ Shadow 2 Optic Ready (91251). Trigger Mech SA/DA. Compatible with all Trijicon manufactured rmr pistol mounts The CZ-USA P10 Optic Plates will also work on the Shadow 2 Optics Ready model, the front right portion of the plate does extend a bit and can be a bit sharp if you grab it just right but functionally it works just fine, the cross bolster under the plate matches with the cross on the slide. CZ UB Optic Ready Cover Plate. Original CZ plate for optics ready CZ P-10 models: CZ P-10C OR, CZ P-10S OR and CZ P-10F OR. Allows mounting of Trijicon RMR red dot models and Trijicon SRO red dot models to your CZ. In Stock - Add to Cart Quick view. . Steel cover with rear sight for optics ready models of CZ Shadow 2 series. Original CZ plate for optics ready CZ P-10 models: CZ P-10C OR, CZ P-10S OR and CZ P-10F OR. Models within this series allow good shooters to perform extremely well and the best shooters to win the most prestigious IPSC competitions. M3-0.5 X8 screws (Qty 2) included for installation of the plate to the frame. RMR. Milling / Optics; Engraving; Tools; Home; Sights; . Just ordered the p10 from Ch. JavaScript seems to be disabled in your browser. Complete Shadow 2 Optic Ready Slide. If your CZ Shadow 2 model isnot"OR" ~ optics ready ~ then you need to be searching for ared dot mountinstead of red dot plate. Holosun 507C. Fitting may be required. Aluminum Read more. In stock items will ship within 1-3 days from purchase. Required fields are marked *. CZ Shadow 2 OR Specs: SKU: 91251 Caliber: 9MM Operation: Semi-Automatic Frame: Steel Trigger Mech: SA/DA Grips: Aluminum Barrel: Cold Hammer Forged Barrel Length: 4.89 In. RMR To anchor the muzzle in the slide, their new turn 1911 style AccuBushing makes the pistol capable of sub-3" groups at 50 yards. Each plate is precision machined to the tightest CZC CZ P10 & Shadow 2 Optic Ready Mounting Plate Sig Romeo 1 by CZ Custom INCLUDES 2 OPTIC PLATE ADAPTER SCREWS, 2 6-32 OPTIC SCREWS Omen V2 Optic Cut: Trijicon RMR/SRO/Holosun 507 Ready W/ Cover Plate In Matching Slide Finish Slide. Click here to see a video from Vortex on how to install our red dot base on a slide. SKU: 91249. Sold Out. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. We are Czech company specializing on accessories for CZs. The dovetail has a progressive taper to allow for easier install. MUST USE M4 THREADED SCREWS (INCLUDED) 459 EDSEL DR RICHMOND HILL,GA 31324912-445-5803, FITS GLOCK MOS (G17, G19, G20, G21, G22, G23, G26, G34, G35, G40, G41, G45, G47), BLACK NITRIDE FOR YOUR PISTOL SLIDE/PISTOL PARTS, Federal 9MM LUGER 115GR FMJ AE9DP (1000 Rounds), Federal 9MM LUGER 124GR FMJ AE9AP (1000 Rounds), This Product: CZ SHADOW 2 OPTICS READY V4 MIL / LEO to Trijicon RMR / SRO / Holosun 407C / 507C / 508C / 508T w/Dovetail for GLOCK Compatible Sights, V4 DEFENDER MIL/LEO Adapter Trijicon RMR (TYPE 1 & 2) Fits GLOCK MOS, SIG P320 Legion (M17 / M18) w/ R1P/DPP Cut to Trijicon RMR / SRO / Holosun 407C / 507C / 508C / 508T w/ Dovetail for GLOCK compatible sights, V4 MIL/LEO Adapter Leupold Delta Point Pro / EOTech EFLX Fits GLOCK MOS, FNX V4 MIL / LEO to Trijicon RMR / SRO / Holosun 407C / 507C / 508C / 508T. We ship internationally and accept online card payments! Vortex Venom Patriot Defense CZ Slide Optic Milling Patriot Defense | CZ Slide Optic Milling (7 reviews) Write a Review Patriot Defense $125.00 CZ Model: Required Optic Cut: Required Slide Armor Fee: Required Rear Sight Dovetail Options: Shipping Insurance: Refinish: Required No Cerakote Optic Pocket Black ($40) Quantity: Description You get: (1) mounting plate (2) screws. Allows mounting of Burris Fast Fire, Eotech MRDS, Jpoint RMD, Leupold Delta Point Pro, Shield RMS, Shield SMS, Sig Romeo 1, Vortex Viper and Vortex Venom to your CZ Universal plate for CZ Shadow 2 OR models. Original CZ plate for CZ Shadow 2 OR models. RTS Series . Factory CZ firing pin stop plate, fits the early "Pre-B" 75's, Shadow 1 & 2, 85C. Use the M4 screws supplied with the red dot. Add to . Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2. If you want to submit flairs for any transactions, you must do so in the current flair thread. THESE ARE FOR THE CHPWS CZ P-10 V4 Holosun 407k / 507k Red Dot Optic Adapter Plate CZ TS 2, CZ Shadow 2, CZ P-10 models, CZ 75 P-01 & Compact, CZ P-07, CZ P-09 , CZ 75B and other CZ 75 models! Allows mounting of Shield RMS red dot models and Shield SMS red dot models to your CZ. For comfortable and accurate extensive use, the CZ 75 Shadow 2 employs innovations such as a higher beavertail and undercut trigger guard, contoured slide, and weighted dust cover/rail which holds the muzzle down, and a set of fiber optic front and serrated, black HAJO rear sights. Since 2017, the Shadow 2 has been approved for Carry Optics, and CZ has started producing guns for that division such as the CZ Shadow 2 Optics-Ready ($1,549, cz-usa.com ). This plate will fit also red dots that share the same footprint ~ full compatibility guide for the footprints of red dots can be found here: red dot compatibility guide. CLICK HERE TO VIEW INSTALLATION INSTRUCTION VIDEOS! Each plate is precision CZC CZ P10 & Shadow 2 Optic Ready Mounting Plate C-More & Vortex Razor by CZ Custom And finally, use either a Dremel/File.). 459 EDSEL DR RICHMOND HILL,GA 31324912-445-5803, FITS GLOCK MOS (G17, G19, G20, G21, G22, G23, G26, G34, G35, G40, G41, G45, G47), BLACK NITRIDE FOR YOUR PISTOL SLIDE/PISTOL PARTS, Federal 9MM LUGER 115GR FMJ AE9DP (1000 Rounds), Federal 9MM LUGER 124GR FMJ AE9AP (1000 Rounds), HK 2020 VP9 V4 MIL / LEO to Holosun 509 ACSS (Primary Arms), HK 2020 VP9 V4 MIL / LEO to Aimpoint ACRO, HK 2020 VP9 V4 MIL / LEO to Leupold Delta Point Pro and EOTech EFLX, AFTERMARKET GLOCK-TYPE RMR CUT SLIDE ADAPTER PLATE (6-32 Mounting Holes), V4 MIL/LEO Adapter Trijicon RMR / SRO Holosun 407C / 507C / 508C / 508T Fits GLOCK MOS, Shadow Systems Aftermarket Slide to Aimpoint ACRO **STEEL **, V4 MIL/LEO Adapter Aimpoint ACRO Fits GLOCK MOS, Shadow Systems Aftermarket Slide to Steiner MPS (PREORDER), V4 MIL/LEO Adapter Steiner MPS Fits GLOCK MOS, BROWNELLS GLOCK-TYPE RMR CUT SLIDE with ZEV POSTS ADAPTER PLATE, S&W M1.0 C.O.R.E. Note Torque the screws to 12-15 inch pounds. You will receive news, offers, and useful information! Firstly place the Red dot on the plate and thread the screws all the way through. 5 out of 5 $ 749.00. Learn how your comment data is processed. Sort by: catalog with pictures list. The newest variant is the CZ Shadow 2 Optics Ready, which was just released in the second quarter of 2020. Does not fit the Tactical Sport models. CZ Shadow 2; CZ P10; CZ 83 Rear Sights; CZ SP01 Shadow / 75 Shadow Rear Sights; CZ PCR; CZ 2075 RAMI; CZ P07 / P09 Rear Sights; Tactical Sports; Low Mount Sights; . If you have an account, sign in now to post with your account. Supplied with Screws Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers. Quote; Link to comment . Pasted as rich text. OPXCZA, OPXCZB, OPXCZC, OPXCZP10A, OPXCZP10B, OPXRCZA, OPXRCZE, Your email address will not be published. Hear they make good stuf. Optics Capable? SF KingSlayer Pistol. Allows mounting of Vortex Razor red dot models to your CZ. Material: Plates are made from 6061 aluminum. Red dot plates are designed for optics ready CZ models. EAN: N/A SKU: 256 Category: Sights. I own a Vortex Viper red dot which was rarely used so I thought why not mount it on my Shadow, but when the Shadow 2 became available it gave me my quandary : Stick with the Shadow and mount the RD or mount it on the Shadow 2. Allows mounting of Trijicon RMR red dot models and Trijicon SRO red dot models to your CZ. Color: Black Finish: Matte Black Hard Coat Anodized Gun Type: Pistol Fit: CZ Shadow 2 Sight Length: 1.604 in Attachment/Mount Type: Dovetail Fabric/Material: 7075 Aluminum Width: 0.99 in Included Accessories: Screws Gun Make: CZ Code: KK-RMT-DCXF-49397 MPN: 49397 UPC: 841370116652 $49.99 Save 10% $44.99 Add To Cart Availability is being updated. CZ Shadow 2 Optic Ready (91251), CZ P-10 & Shadow 2 Optic Plate Adapter for RTS & Razor (1091141002) Burris Fast Fire 3 TAURUS; SEALING PLATES; SLIDE MILLING. A custom hammer further lightens and smooths the . This variant of the Shadow 2 is pre-cut for an optic plate system to allow the mounting of a red dot . Add to Wishlist. Your link has been automatically embedded. I can say it is a solid mounting plate Posted I got this one from Toni Systems in Italy, I like the cocking serrations. The adapter plate seamlessly blends into the slide and follows the same contours as the optic, making it the most aesthetic mounting solution available. For more info on the OR variant read this review. Could take. It's nothing revolutionary, but it's beautiful nonetheless. CZ Shadow 2 Optics-Ready. cz-usa.com is using a security service for protection against online attacks. Add to cart. TRUTEC MICRO CZ Red Dot Plates & Mounts Compatibility Guide, Mounting red dot with Trijicon RMR footprint to "optics ready" CZ, Mounting red dot with Trijicon RMR footprint to standard CZ, CZ 75B & SP-01, CZ 75 P-01 & COMPACT, CZ 85 & 97 RED DOT MOUNT UNIVERSAL | TYPE B, Mounting red dot with Vortex Venom footprint to "optics ready" CZ, Mounting red dot with Vortex Venom footprint to standard CZ, CZ 75B & SP-01, CZ 75 P-01 & COMPACT, CZ 85 & 97 RED DOT MOUNT UNIVERSAL | TYPE A, Mounting red dot with C-More RTS / STS footprint to "optics ready" CZ, Mounting red dot with C-More RTS / STS footprint to standard CZ. Reason to Buy MADE IN THE USA. the rear two locater pins on the plate must be filed off in order to allow the 407K/507K to fit.) CZ Shadow 2 optics ready red dot plates RED DOT PLATES You can find here red dot plates for all optics ready CZs: CZ Shadow 2 OR & CZ P-10 OR models ! This does not change userflairs. Toni System 4-Hole Thumb Rest Left Handed, Toni System 3 Hole Thumb Rest Left Handed, Tanfoglio Limited Custom Xtreme Gold Match (from 2017), Tanfoglio Limited Custom Gold Match (before 2017), Tanfoglio Gold Custom Xtreme Eric Grauffel (before 2017), Compatible with CZ factory milled optics ready slide. CZ P-07 Pit . Add to Wishlist. In the event screws are too long with either M4 (or) M3, it is possible to adjust to the desired length by cutting down the screws to suit. $40 each plus shipping Do-It-Right Bundle: Check all three of these products and hit "add to cart" for a 15% discount! ForSig Romeo 1 Original CZ plate for optics ready CZ P-10 models: CZ P-10C OR, CZ P-10S OR and CZ P-10F OR. . this product is compatible with GLOCK pistols, HOLOSUN 407C / 507C / 508T, TRIJICON RMR, TRIJICON SRO. 1. MUST USE M3 THREADED SCREWS TO ATTACH OPTIC TO PLATE Magazine Capacity 17+1. The CZ Shadow 2 Optics Ready handgun brings with it all the features of the popular Shadow 2 platform, now with option for quickly and easily mounting optics. This mount fits:CZ 75 ShadowCZ 75 SP01 ShadowCZ Shadow 2Dan Wesson DWXDan Wesson DWX CompactThis mount does not fit:Shadow 2 Optics ReadyShadow 2 Kadet. CZ Shadow 2 Optics Ready PlateMonteer je Red Dot met deze plate op je wapen CS OR We hebben geconstateerd dat JavaScript Gedeactiveerd is. DOCTOR We do not ship to freight forwarders or a hotel address. At the chpws website, they sell the one you have posted and you can also use their P10 plate, with not provisions for rear sight. Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.780"Overall Width: 1.1"Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set ScrewRed Dot Fitment:Trijicon RMR / SRO, Holosun HE407C / HE407C X2 / HE507C / HE507C X2 / HS407C / HS407C X2 / HS507C / HS507C X2, Swampfox Kingslayer / Liberty / Justice. Plate to Slide Screws are CounterSunk M3 x 6mm Torx. moms Fast delivery! CZ SHADOW 2 OPTICS READY V4 MIL / LEO to Trijicon RMR / SRO / Holosun 407C / 507C / 508C / 508T w/Dovetail for GLOCK Compatible Sights $ 104.45 THE MOST MODULAR, RUGGED, DURABLE, RELIABLE, AND WIDELY USED AFTERMARKET OPTICS ADAPTER PLATE. CZ SHADOW 2 RED DOT PLATE | C-MORE RTS / STS Mounting red dot with C-More RTS / STS footprint to standard CZ If you have standard models with dovetail for rear sight, you can choose from these mounts in order to mount the above listed red dots: For all P-10 models CZ P-10 UNIVERSAL RED DOT MOUNT | TYPE B MSRP: Out of stock Quick view . Showing 1 - 10 from the total of 10 . You can take our mount off and replace your rear sight at any time. Supplied with Screws CZC Red Dot Optic Plate for Delta Point Pro (CZC RDS Cut Slides) by CZ Custom Original CZ plate for optics ready CZ P-10 models: CZ P-10C OR, CZ P-10S OR and CZ P-10F OR. CZ Shadow 2 Optic Ready CZ P-10 & Shadow 2 Optic Plate Adapter for Shield RMS & SMS (1091141006) Original CZ plate for optics ready CZ P-10 models: CZ P-10C OR, CZ P-10S OR and CZ P-10F OR. Thanks all! ForC-More, STS. MSRP $1,999.00. The use of a certified gunsmith is suggested to ensure proper installation. For Burris Fastfire and others sharing the FF footprint. Just as the standard Shadow 2 has become the gun of choice for many USPSA Production Division competitors, the Shadow 2 Optics-Ready is ideal for USPSA Carry Optics. CZ RED DOT PLATE SPARE SCREWS | 2pcs . Read more. This is a proprietary plate for use with the CZ Custom RDS Slide Cut. BrianEnos.com For Burris Fastfire and others sharing the FF footprint. Please note mounting screws are not included, use thescrews supplied with the red dot. $449.99. You can find here all sorts of CZ accessories from CZ itself as well as from other European manufacturers. Safety on the Shadow 2 is basically useless, nobody uses it. CZ Shadow 2 Optic Ready (OR) Plate Trijicon RMR. Allows mounting of Aimpoint Acro red dot to your CZ. Din varukorg. EAN: N/A SKU: 257 Category: Sights. 8-32 Threaded Hole for the scope manufactures mounting screws Paste as plain text instead, It is less money. I have a shadow 2 with the CZ custom multi optic cut, does any know if the Romeo plate fits the new Romeo 1 Pro? Precision cut for a tight fit for the Shadow 2 optic ready model. Boss Components recommends 15-inch lbs of torque and a drip of blue Loctite on mounting screws.

cz shadow 2 optics ready plate 2023